* Are you stress testing, breaking lines or cables and still need to show the last registered weight on the indicator?
> Please see our hanging crane scales from 250lb to 20,000lb maximum capacity.  We simply upgrade the digital indicator and set the software for "peak hold", calibrate the unit and ship it direct to you.  You can then pull a line, cable, cord, etc. until it breaks and read the last registered weight. Prices start at $695. Call in your order to One Digital Scales.


Since 1937, Dillon Dynamometers have been chosen for the jobs where only the best will do. Feature for feature - Dillon Dynamometer sets the standard!

FEATURES AND BENEFITS:

The Dillon AP Mechanical Dynamometer exhibits limitless versatility as a tension, traction and weight measuring instrument.

Full selection of capacities-
Available in capacities from 500 to 100,000 pounds, 200 to 50,000 kilograms, 2,000 to 500,000 Newtons.

Long life-
The core of the device is a steel flexing beam. The enclosure is a heavy aluminum alloy case with baked on protective finish. The dial face is sealed and cushioned with a rubber gasket.

Safe for overhead applications-
Most models have a 5:1 ultimate safety factor.

Zero control-
Use it like a tare. It can cancel preset load values up to 20% of device capacity.

SPECIFICATIONS:

• Accuracy: + 0.5% of capacity
• Temperature range: -50° to 140° F (-45° to 60° C)
• Ultimate Safety Factor:
  See table on cover for minimum USF

Construction:

• Pressure bar -
  Aircraft quality E4340 steel or 7075-T651
• Aaluminum
  Shackles -
  A4140 forged steel (machined from E4340 steel)
• Shackle pins -
  Machined from E4340 steel

Case housing:

• 5” models are equipped with high strength composite plastic case.
• 10” models use cast aluminum enclosure.

Corrosion protection:

• Pressure bar protected with durable powder coat paint.
• Shackles and pins are electroless nickel plated.
• All integral machining and fasteners are produced from noncorrosive materials or have suitable plating.
• Zero control: Zero up to 20% of capacity. Zeroed load must be considered as part of ultimate load.
• Calibration: Traceable to NIST.
• Documentation: Includes User’s Guide and signed calibration card.
• Periodic proof loads: Controlled 150% proof loads permitted annually.

Originally designed to measure the tension on telephone wires, the Dynamometer has proven to have limitless versatility as a tension and weight measuring instrument. It is used for such diverse jobs as suspended weighing: mounting cables for bridges adjusting tension on guy wires field testing chain, rope, wire - anything requiring precision force or tension measurement.

Dillon is the leader in Dynamometers with the largest installed population throughout the world. The sturdy design, top grade components and premium coatings make it last for years in severe environments and applications: the pounding aboard military vehicles, rough handling in field measurements and even use underwater. (Dillon recommends short intervals in clean water followed with rinse and drain.) Embraced by industrial contractors across the globe, we are confident the AP will satisfy your most demanding applications.

Dillon AP Dynamometer Specifications

Get the free Adobe Acrobat Reader from Adobe.com