NEW! Peak Hold Crane Scales for stress, line, tension testing! 

 
$10 Target free gift card included with this purchase

Add options of rechargeable battery, extra cable, etc.

One Digital Scales brings you a peak hold crane scale perfect for all your unique applications ranging from stress/line testing to high tension situations.  The peak hold crane scale utilizes a highly accurate hanging load cell that comes pre-calibrated so you simply remove from the box and begin weighing.

The scale includes a 10 ft. of cable (we can add more cable, see below FAQ's) between the crane scale and the digital weight indicator.The load cell is nickel plated tool steel and the overload capacity is rated 1.5 times the scale capacity. This crane scale also has a standard RS-232 interface which lets you connect this scale to a printer or personal computer.

Indicator
» ABS NEMA 12 enclosure
» NTEP approved for 5000 divisions
» Full duplex RS-232 serial port (connect to PC or printer)
» Easy to read 0.6" LED display
» Stainless steel swivel stand
» 110V powered (standard) - for rechargeable battery upgrade to TI-500BWL
(add $75)

Applications
The digital crane scale can be hung from a backloader or forklift or hung from a beam above.  Applications for digital crane scale can be used for almost any type of hanging application.  You can weigh engine motors or transmissions, fuel panels from planes, fish or other non-living animals, industrial parts or equipment, construction materials, and metal drums. Industrial crane scales or dynamometers are used in a variety of applications from industrial weighing, aerospace weighing, auto parts weighing, military weighing, advanced stock management, foundry weighing, entertainment overhead rigging, and offshore.

Printer Options
This peak hold crane scale and indicator works best with the MP20 printer. The MP20 printer prints either receipt paper (2" continuous roll) or thermal labels available factory direct in the 2x2", 2x3", or 2x4".  When you press PRINT on the indicator, only the weight will print except on the TI-500BWL (this is an upgrade) which will print the Time/Date and Weight. 

Connecting to a Computer
For transmission of scale data to a computer you will need a data cable (add $45), and the customer must notify us at the time of purchase so we can set up the scale for "continuous ouput".  The customer will need our Winwedge software to interpret the data string.

< 20,000lb Capacity Model (pictured)

FAQ's:

Does this measure in pounds or kilograms?
A: This unit measures in both pounds and kilograms.
How long is the cable between the scale and the display?  And what if we want to extend the cable length - is there an additional cost?
A: The standard cable length is approx. 8-10ft.  Yes, please add $1.75 charge for each additional foot of cable you want to add. There will also be a $50 service fee to switch connectors.  This type of order you must call in (800) 620-7811.
Is this waterproof?  Can we make it waterproof?
A: No, the standard crane scale is not waterproof.  However, we can add  stainless steel components and hermetacally seal the scale to make it waterproof. Call in to customize this scale or look at our NC-1 (250lb-1K) or Caston II (2-10K) or Caston III (10K-100K)crane scales (these three are all waterproof and enviornmentally sealed to IP67 standards). 
Can this scale do pull or stress testing or tension weighing?
A: YES, this unit does stress testing. We set the software to capture the last weight (ie. peak hold) the scale registers before breaking the line or cable.
How is this scale powered?
A: This peak hold crane scale is powered by 110V (standard). If you would like to add the rechargeable battery option you will need to upgrade to the TI-500BWL which will add $75 to any unit. 

Masterline Peak Hold Crane Scales

Crane Scale Specifications Sheet

Get the free Adobe Acrobat Reader from Adobe.com