SCALES  > Indicators  > VC-202 NTEP Digital Indicator with RS-232
VC-202 NTEP Digital Indicator with RS-232
Description



This indicator features the peak hold function which allows for stress testing and measuring the maximum breaking point.

FEATURES
 
  • 10,000 Display resolution (NTEP approved)
  • 10 Pre-defined Tare value
  • able kg / lb / g / oz
  • Programmable as Main Indicator & Remote Display
  • Programmable custom print format
  • Configurable for Animal Weighing Application
  • Easy Panel Mount Design
  • Optional Re-chargeable battery





FAQ's

Does this indicator have a RS232 output port?
A: Yes, this indicator does have a RS232 output. The RS232 function allows you to connect the indicato (and ultimately the scale) to a PC or a printer.

Does this have the peak hold feature?
A: Yes, this does have the peak hold feature used for stress testing.
Specifications

Specifications
Internal Resolution 1,000,000 counts at 3mV/V
Display Resolution able (1/10,000 NTEP approved)
Input Sensitivity 1uV/graduation minimum
Display Increments able x1, x2, x5, x10, x20, x50, x100
Decimal Point Location able 0 ~ 4
Display 7 Digits 7-Segment LED display, 14.2mm (0.56”) high, with annunciators (7 LED lamps) for function , Stable, Center Zero, Net, Print, kg, lb, andLow Battery display
Keyboard 18 button (VC-202) or 6 button (VC-201) keypad with tactile keys(includes 1 button for Power On/Off)
Audio Alarm Tone for key entry confirmation and low battery alarm
A/D Conversion Rate 7.5 updates per second
Load Cell Excitation Voltage 9.8VDC or 5VDC able. Drive up to four 350 ohm load cells
Analog Input Range 0.2mV/V to 3.0 mV/V maximum
Non-Linearity 0.01% of full scale or less
Over Capacity Display “CAP OL” when exceeds the full Scale Capacity
Tare Full capacity, push button tare, numeric key tare.
Register and Recall 10 Pre-defined Tare valves
Auto Zero Tracking able to 3.0 d by 0.5 d step
Motion Window Key-in data 0..255 (1 = 0.5 d)
Calibration Method Software – Menu driven prompting
Units of Measure able kg/lb/g/oz, up to 2 units displayable
RFI/EMI Protection All signal and excitation lines filtered to –65db min. @ 500MHz
Filtering able digital filter
RS232C data output COM Port 1. Full Duplex or Bi-directional
COM Port 2. Simplex or Unidirectional (output only)
able baud rates (1200,2400,4800,9600,19200), manual or auto print, continuous data out or bi-directional communication
Remote Display Programmable as Main Indicator and Remote Display
Custom Print Format Programmable, up to 119 characters for Custom Print Format and up to 23 characters for Continuous Print Format
Set Points able up to 2 Set Points for Low and High limit settings
Power 100/115VAC or 220/230VAC, 50-60Hz, 6VA with built-in Charger for 12 VDC 2-2.3AH Rechargeable Sealed Lead Acid Battery(Battery Dimension 67 (H) x 178 (W) x 34 (D) mm, is optional)
Current Consumption 100mA + 30mA per 350 ohm load cell
Operating Temperature -10 degrees C to + 40 degrees C
Relative Humidity Maximum 90% RH, Non-condensing
Dimensions 150 (6”)H x 230 (9.1”)W x 100 (4”)D mm – VC-202
140 (5.5”)H x 230 (9.1”)W x 90 (3.5”)D mm – VC-203
Shipping weight 1.2kg (2.3kg with optional battery) – VC-202
2.1kg (3.2kg with optional battery) – VC-203
Enclosure VC-202 ABS Plastic Casing, VC-203 Stainless Steel Casing
Warranty One Year Limited Warranty
SCALES VC-202 NTEP Digital Indicator with RS-232