FEATURES

10,000 Display resolution (NTEP approved) 10 Pre-defined Tare value Selectable kg / lb / g / oz Programmable as Main Indicator & Remote Display Programmable custom print format Configurable for Animal Weighing Application Easy Panel Mount Design Optional Re-chargeable battery

FAQ's

Does this indicator have a RS232 output port?
A: Yes, this indicator does have a RS232 output. The RS232 function allows you to connect the indicato (and ultimately the scale) to a PC or a printer.

Specifications
Internal Resolution	1,000,000 counts at 3mV/V
Display Resolution	Selectable (1/10,000 NTEP approved)
Input Sensitivity	1µV/graduation typical, 0.4µV/graduation minimum
Display Increments	Selectable x1, x2, x5, x10, x20, x50, x100
Decimal Point Location	Selectable 0 ~ 4
Display	7 Digits 7-Segment LED display, 14.2mm (0.56”) high, with annunciators (7 LED lamps) for function select, Stable, Center Zero, Net, Print, kg, lb, and Low Battery display 135
Keyboard	6 button keypad with tactile keys (includes 1 button for Power On/Off)
Audio Alarm	Tone for key entry confirmation and low battery alarm
A/D Conversion Rate	7.5 updates per second
Load Cell Excitation Voltage	9.7VDC or 5VDC selectable. Drive up to six 350 ohm load cells
Analog Input Range	0.2mV/V to 3.0 mV/V maximum
Non-Linearity	0.01% of full scale or less
Over Capacity	Display “CAP OL” when exceeds the full scale capacity
Tare	Full capacity, push button tare
Auto Zero Tracking	Selectable to 3.0 d by 0.5 d step
Motion Window	Key-in data 0..255 (1 = 0.5 d)
Calibration Method	Software – Menu driven prompting
Units of Measure	Selectable kg/lb/g/oz, up to 2 units displayable
RFI/EMI Protection	All signal and excitation lines filtered to –65db min. @ 500MHz
Filtering	Selectable digital filter
Serial RS232C Data Output	COM Port 1. Full Duplex or Bi-directional COM Port 2. Simplex or Unidirectional (output only) Selectable baud rates (1200,2400,4800,9600,19200), manual or auto print, continuous data out or bi-directional communication
Remote Display	Programmable as Remote Display
Print Format	Gross Wt, Tare Wt, Net Wt
Power	100/115VAC or 220/230VAC, 50-60Hz, 6VA with built-in Charger for 12 VDC 2-2.3AH Rechargeable Sealed Lead Acid Battery (Battery Dimension 67 (H) x 178 (W) x 34 (D) mm, is optional)
Current Consumption	100mA + 30mA per 350 ohm load cell
Operating Temperature	-10°C to + 40°C
Relative Humidity	Maximum 90% RH, Non-condensing
Shipping Weight	1.2kg (2.3kg with optional battery
Enclosure	ABS Plastic Casing
Warranty	One Year Limited Warranty