The 7840 bench scale easily accommodates oversize parcels or containers in the shipping room. It has a fast digital response and large weigh platter. This NTEP approved scale is also available with a ball-top platter.

Features:

» Fast Digital Response – Speeds processing time that results in improved throughput and increased productivity.
» Simple to Use – Reduces operator training time.
» DuraBridge® Technology – Reduces overall scale deflection when a full load is applied.
» Resident Display – Front mounted, 1/2" H, six-digit LCD display.
» Large Weigh Platters – Easily accommodates oversize parcels or containers.
» Versatile – Can be set up in either decimal pounds or kilogram mode.
» Construction – Stainless steel weigh platter. Painted mild steel base enclosure.
» RS-232 Cable – DB-9 pin female connector allows you to connect to a PC.
» Controls – ZERO: With auto zero tracking for zeroing the scale. TEST: Runs a diagnostic program to assure scale is fully functional.
» I/O Port – Allows for connection to a computer or smart terminal. Uses standard PC cable to 9-pin "D" connector on scale. RS-232, bidirectional, configurable 1200 - 19.2K baud. Transmits weight and scale status whenever ASCII “W” <CR> is sent by a remote device. High resolution “H” command accesses increased resolution.
» Power Supply – Recessed power supply with standard wall plug.

Options:

Ball-Top Weigh Platter – Simplifies transport of all parcels. Ideal for conveyor lines. One piece lift-off design equipped with 17 balls. (add $350.00)
Remote Display – Six-digit LCD housed in a molded enclosure with a 7-ft. cable.
Display Tower – 12” tower for remote display. (add $65.00)
International Power Supply – 230 VAC, 50 Hz power supply. End of cable terminated with a universal conductor.  (add $25.00)

Capacity and Resolution:
250 lb x .05 lb or 100 kg x .02 kg
300 lb x 0.1 lb or 150 kg x .05 kg

Weight classifier or scale configurations available in setup.

Shipping Weight:
70 lbs (Standard Configuration)
76 lb (With Ball-Top)

Platter Size: 18” x 24”
Power: 120 VAC (+10%-15%), 60 Hz, standard 3-wire ground.
Agency Approvals:
United States: NTEP #95-121
Canada: MOI #AM-5099 Rev. 1 For use as a Class III Device from +5°C through 40°C
Operating Environment: 42°F to 104°F (5°C to 40°C), 10% to 95%, RH (non-condensing

NTEP approved (legal for trade)

 UPS compatible

Literature (printable documents):

NCI 7840 Specifications Sheet

Get the free Adobe Acrobat Reader from Adobe.com